1. <wbr id="efg83"><fieldset id="efg83"></fieldset></wbr>
        <pre id="efg83"><tfoot id="efg83"></tfoot></pre>
          1. <ul id="efg83"><blockquote id="efg83"></blockquote></ul>

            亚洲乱亚洲乱妇在线,亚洲2018天堂在线2017,久久人妻网,国产av无码久久精品,日也干夜也爱在线视频,无遮挡十八禁污污网站免费 ,国产av国内精品jk制服,色综合亚洲一区二区小说
            Chinese

            Advisory hotline: 4008-557-528

            hot key words: Dongguan skived fin heat sink vendor Shenzhen skived fin heat sink vendor Dongguan PV inverter heat sink PV inverter heat sink vendor Jiangsu skived fin heat sink vendor Custom SVG heat pipe thermal module

            3C products are also called information home appliances, which typically mean computers, telecommunications, and consumer electronics. There are a wide variety of products with a huge demand. China has become the worldwide largest 3C consumption market for 3C products. With the enhancement of the financial condition and income of our citizens, there is a higher demand for the quality of electronic products. Companies launch products with better configuration, better performance, andbetter designs in order to satisfy consumers
            There are a great number of factors which affect the quality of electronic products and cooling is a factor that could not be neglected. Especially after the development of the "Samsung battery-gate" event in 2016, electronics manufacturers pay more attention to the cooling performance and safety of their products. How to make sure the cooling of an electronic product meet the stringent design requirements? The best approach is to plan for thermal management at the beginning of the product design cycle so as to acquire the optimal cooling solution. Winshare Thermal is an outstanding cooling techniques supplier, who can provide the cooling solutions for IT telecommunication electronics products including mainboard cooling, CPU cooling, graphics card cooling, radio frequency module cooling,RU cooling, game console cooling,VR cooling, IPC cooling, server cooling, central variable frequency air conditioner cooling,TEC cooling, etc.
            The target to be achieved by the simulation of the cooling solution:
            PCB source temperature ≤100
            CPU temperature ≤80℃
            Schematic of simulation model and relevant parameters:
            (1)

            DCDC output

            Thermal conductivity:10W/(m*K) Power:5W

            CPU chipset

            Thermal conductivity:10W/(m*k) Power:10W

            PCB MST

            Thermal conductivity:15W/(m*K) Power:5W

            CPU PCB

            Thermal conductivity:15W/(m*K) Power:4W

            CPU heat sink

            Dimensions: 125*95*6mm, base plate thickness:2mm, fin count: 10pcs, thickness: 0.6mm;Thermal conductivity: AL-extru. 180W/(m*K)

            CU block

            Dimensions:41*41*4.7, Thermal conductivity:385 W/(m*k)

            Thermal grease

            Thickness: 0.3mm,Thermal conductivity:3.5W/(m*K)

            Soldering approach

            Solder paste 4258,Thermal conductivity:48W/(m*k) 0.2mm

             
            (2)

            Front side of the grille

            Dimensions:170*27mm; Open area ratio:0.5

            Right side of the grille

            Dimensions:35*30 mm; Open area ratio:0.6

            Back side of the grille

            Dimensions:30*30 mm; Open area ratio::0.7

            fan

            Dimensions:30*30*10 mm

             
            (3)

            Top side of mainboard

            Dimensions:140*170mm; Thermal conductivity:10W/(m*k); Power:3W

            Back side of heat source

            0.8W/pcs

            Front side of heat source

            Left row:0.8W/pcs; right row: 1.2W/pcs;
            The Row marked as "2":1.5W/pcs

            Heat sink

            Dimensions:140*170*4.5mm; Base plate thickness: 2mm; Fin height:2.5mm,
            Fin count:10pcs; fin thickness:0.6mm; Thermal conductivity:180W/(m*K)

            Thermal grease

            Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

             
            (4)

            ottom side of mainboard

            Dimensions:140*170mm; Thermal conductivity:10W/(m*k); Power:3W。

            Source of inverse

            功率:1.5W/pcs

            Heat sink

            Dimensions:140*170*4.5mm; Base plate thickness: 2mm; Fin height:2.5mm,
            Fin count:10pcs; Fin thickness:0.6mm; Thermal conductivity:180W/(m*K)

            Thermal grease

            Thickness: 0.3mm; Thermal conductivity:3.5W/(m*K)

             
            Descriptions of the heat sink cooling solution:

            (1) Add an30*10mm axial fan to increase the air flow through RX module;
            (2) Modify the copper fins in front of the fan in order to increase system air flow.

            Schematic of the simulation model of the overall cooling layout:
            Parameters of the copper fins after the modification:

            Copper fins

            Dimensions:30*12*0.3mm; Inclination: 1.0; Quantity: 30pcs

            Material:C1100; Thermal conductivity:385W/(m*K)。

            Heat pipe

            D6 heat pipe thickness: 3mm with the pressed-tube technique; Heat pipe type: Powder sintered;
            Thermal conductivity:10000W/(m*k)

            Add a 30*10mm axial fan; the open area ratio of the new fan inlet is 0.7.

            Baffle

            Dimensions:160*33*0.5mm; Material: SUS

             
            CPU fan operating point: Volume flow rate:2.43ft^3/min Pressure:17.47Pa
            Schematic of simulated CPU module temperature and air flow distribution:
             Ambient temperature: 40℃; Maximum temperature of the CPU chipset:64.43℃
            Schematic of the simulated temperature distribution on the top side of the RX module:

            NO.

            Maximum temperature

            NO.

            Maximum temperature

            NO.

            Maximum temperature

            Source 1

            59.43

            Source 1.7

            59.73

            Source 3.1

            59.59

            Source 1.1

            59.54

            Source 2

            60.02

            Source 3.2

            59.7

            Source 1.2

            59.66

            Source 2.1

            60.19

            Source 3.3

            59.77

            Source 1.3

            59.73

            Source 2.2

            60.16

            Source 3.4

            59.8

            Source 1.4

            59.76

            Source 2.3

            59.96

            Source 3.5

            59.8

            Source 1.5

            59.77

            Source 2.4

            59.76

            Source 3.6

            59.78

            Source 1.6

            59.76

             Source 3

             59.48

            Source 3.7

            59.74

            Schematic of the simulated temperature distribution on the bottom side of the RX module:
             

            NO.

            Maximum

            NO.

            Maximum

            Source 4

            60.83

            Source 4.4

            60.95

            Source 4.1

            60.53

            Source 4.5

            60.89

            Source 4.2

            60.92

            Source 4.6

            60.8

            Source 4.3

            60.96

            Source 4.7

            60.67

            Fan operating point:
            CPU fan: 2.43ft^3/min ,17.47Pa;
            RX fan1: 2.23ft^3/min ,18.65Pa;
            RX fan2: 2.5ft^3/min ,17.09Pa;
            RX fan3:2.22ft^3/min,18.70Pa。
             
            Air flow through fan grilles:
            CPU grille:2.26ft^3/min;
            RX grille1:1.95 ft^3/min;
            RX grille2:2.23 ft^3/min;
            RX grille3:1.962ft^3/min;
            Total: 8.4ft^3/min。
             
            Miniature of the overall air flow trajectory from the simulation results:
             
            Summary of the simulation results for the cooling solution:

             

            CPU maximum temperature
            (℃)

            Temperature range of the heat source
            (℃)

            System air flow
            (ft^3/min)

            Simulation results of the solution

            64.43

            60.92~59.43

            8.4

            The results meet the requirements of CPUtemperature less thanand heat source temperature less than 100℃ and the thermal design is complete.

             

            The voice of Winshare Thermal: credit and word

            Winshare Thermal Ltd. (hereinafter referred to as Winshare Thermal) was founded in 2009. We specialize in the research and development, production and technical services of high power cooling solutions. We are devoted to becoming the leader in the thermal... [See details]

            Copyright: Dongguan Winshare Thermal Ltd.

            主站蜘蛛池模板: 国产91av在线播放| 毛茸茸厕所偷窥xxxx| 91福利一区福利二区| 国产精品无码免费网站 | 天堂久久久久VA久久久久| 亚洲av无码不卡| 亚洲AV无码日韩精品影片| 国产国拍亚洲精品av在线| 欧美精产国品一二三类产品特点 | 中国凸偷窥XXXX自由视频妇科| 夜夜爽8888天天躁夜夜躁狠狠| 国产精品一级无码久久久| 留坝县| 7878成人国产在线观看| 九龙城区| 免费久久人人爽人人爽AV| 日本免费一区二区三区在线播放| 亚洲一区二区精品久久AV| 天天射天天操天天日| 第一精品福利导福航| 国产精品看黄Av免费| 疏附县| 激情综合网激情综合| 一级A婬片免费观看| 毛片在线播放网站免费| 欧美日韩精品国产综合| 又大又紧又粉嫩18p少妇| 亚洲处破女AV日韩精品| 无人区码一码二码三码区别新月| 日韩在线色欲一区二区视频| 91性高湖久久久久久久久| 精品久久久噜噜噜久久久 | 暖暖爱视频免费| 久久婷婷五月综合丁香人人爽| 国产精品爽爽Va在线观看无码 | 亚洲国产午夜理论片不卡| 久久久久久亚洲Av无码精品专口| 精品国产在天天线2019| 国产国语对白又大又粗又爽| 亚洲AV电影天堂男人的天堂| 日本猛少妇色XXXXX猛交|